DeFazio Rotary, Inc.

You can Down load a 3 Meg E-Drawing of the plastic/working model.  You can manipulate this drawing to:

1. View it from different angles
2. Create a section plain and drag it through the drawing to see surface cuts of the model.
3. Move components to look at internal components.
4. Measure the pieces.  This model has a 6" diameter flywheel and a 6" diameter rotor with the compression pistons in it.
5. Zoom in or out.
6. Rotate around to see the model from various angles.

    This engine will operate only at full throttle to demonstrate the torque and horsepower of the 6" engine.  The depicted engine (with two (2) compression pistons) is expected to efficiently produce 4 Hp at 2500 RPM.  The six (6) power piston version with 36 compression pistons will then be expected to produce about 288 horsepower at 10,000 RPM and about 576 horsepower at 20,000 RPM.  AMAZING ISN'T IT.

Click on Pictorial Description to view a pictorial description of the plastic/working model.

[ Home ] [ Pictorial Description ]

Send mail to webmaster@defazio-rotary.com with questions or comments about this web site.
Last modified: 01/30/03